ELECTROLUX-REX LI1070E User Manual download pdf (Page 8)

Measure out the detergent and the fab-

ric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the main wash compart-

ment

or in the appropriate compartment

if the selected programme/option it requires

(see more details in «Detergent dispenser

drawer»).

If required, pour fabric softener into the

compartment marked

(the amount used

must not exceed the «MAX» mark in the

drawer). Close the drawer gently.

Select the required programme by

turning the programme selector dial (1)

Turn the programme selector dial to the re-

quired programme. The washing machine

will automatically select the maximum spin

value provided for the programme you have

chosen. You can change this value by

pressing the corresponding button. The

green pilot light of the button 5 starts to

flash.

The selector dial can be turned either clock-

wise or counterclockwise. Turn to position

to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-

tor dial must be turned to position

,

to switch the machine off.

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 5 will blink 3 times

to indicate a wrong selection. The

machine will not perform the new

selected programme.

Reduce the spin speed by pressing

button 2

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 2 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant light

illuminates.

Select the available options by

pressing buttons 2, 3 and 4

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding pilot lights illuminate. When they

are pressed again, the pilot lights go out. If

an incorrect option is selected, the integra-

ted red pilot light of the button 5 flashes 3

times.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing

button 6

Before you start the programme, if you wish

to delay the start, press the button 6 re-

peatedly, to select the desired delay. The

relevant light illuminates.

8 electrolux

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments