ELECTROLUX-REX LI1070E User Manual download pdf (Page 20)

Problem Possible cause/Solution

Spinning starts late or the

machine does not spin:

The electronic unbalance detection device has cut in because the

laundry is not evenly distributed in the drum. The laundry is redis-

tributed by reverse rotation of the drum. This may happen several

times before the unbalance disappears and normal spinning can

resume. If, after 10 minutes, the laundry is still not evenly distrib-

uted in the drum, the machine will not spin. In this case, redistrib-

ute the load manually and select the spin programme.

• Redistribute the laundry.

The load is too small.

• Add more items, redistribute the load manually and then select

the spinning programme.

The machine makes an un-

usual noise:

The machine is fitted with a type of motor which makes an unusual

noise compared with other traditional motors. This new motor en-

sures a softer start and more even distribution of the laundry in the

drum when spinning, as well as increased stability of the machine.

No water is visible in the

drum:

Machines based on modern technology operate very economically

using very little water without affecting performance.

If you are unable to identify or solve the

problem, contact our service centre. Before

telephoning, make a note of the model, se-

rial number and purchase date of your ma-

chine: the Service Centre will require this

information.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ...

TECHNICAL DATA

Dimensions Width / Height / Depth 596 / 820 / 544 mm

Electrical connection Voltage

Overall power

Fuse

Frequency

220-230 V

2000 W

10 A

50 Hz

Water supply pressure Minimum

Maximum

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

Level of protection against ingress of solid particles and moisture IPX4

Water supply

Cold water

Maximum Load Cotton 7 kg

Spin Speed Maximum 1000 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

Unpacking

All transit bolts and packing must be re-

moved before using the appliance.

You are advised to keep all transit devices

so that they can be refitted if the machine

ever has to be transported again.

1. After removing all the packaging, care-

fully lay machine on it’s back to remove

the polystyrene base from the bottom.

20 electrolux

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

ELECTROLUX-REX LI1070E User Manual Page 20

Comments to this Manuals

Related products and manuals for Washing machines ELECTROLUX-REX LI1070E