user manualWashing MachineRWP 105205 W
Tar stains : first treat with stain remover, methy-lated spirits or benzine, then rub with detergentpaste.Open the door by carefully pulling the doorh
When the degree of hardness is soft, readjust thequantity of the detergent.Open the detergent dispenser drawer Compartment for powder or liquid deterg
• Measure out the detergent.• Pour the powder detergent into the main washcompartment .The flap is up and you wish to use liquid de-tergent:• Rotate
Set your washing programmeThe control panel permits to select a washing programmes and different options.When an option button is selected, the corres
31000900700.firtneCRiduzione Centrifuga (Centrif.)By selecting a programme, the appliance proposes automatical-ly the maximum spin speed provided for
6asuaP/oivvAStart the programme by pressing the button 6• To start the selected programme, press the button 6 , the cor-responding green pilot light s
At the end of the programmeThe appliance stops automatically. The pilot lightof the button 6 and the pilot light correspondingto the just finished was
Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m
Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m
Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m
Electrolux. Thinking of you.Share more of our thinking at www.electrolux.com SAFETY INFORMATIONImportant! Read carefully and keep for futurereference
• To aid cleaning, the top part of the additive com-partment should be removed.• Use a stiff brush to clean and remove all wash-ing powder residue.• C
• Open the filter cover by pressing the specialhook and by rotating the cover upwards.;Warning! Keep the filter cover open untilthe filter removal.•
• Close the filter cover.• Insert the mains plug again.Cleaning the water inlet filtersImportant! If the appliance doesn't fill, it takes along
Fault code and mal-functionPossible cause / SolutionasuaP/oivvA/The light of button 6flashes and the light7.1 illuminates:Problem with the wa-ter supp
Malfunction Possible cause / SolutionThe appliance doesnot start:The plug is not properly inserted in the power socket.• Insert the plug into the powe
Malfunction Possible cause / SolutionUnsatisfactory wash-ing resultsToo little detergent or unsuitable detergent has been used.• Increase the detergen
26 electrolux
electrolux 27
132 943 650 - 00 - 352010 www.electrolux.com/shop
• Any electrical work required to install this appli-ance should be carried out by a qualified elec-trician or competent person.Use• This appliance is
hoses in the bowl placed on the floor and letwater drain out completely;7. screw the water inlet hose back on and repo-sition drain hose again;When yo
7 Water drain hose8 Drain hose support9 Hose holders10 Water inlet hose11 Mains cable12 Back feetTECHNICAL DATADimensions WidthHeightDepthDepth (Overa
21• Return appliance to the upright position.• Open the door and remove the plastic hoseguide, the bag containing the instruction book-let and the pla
x2Accurate levelling prevents vibration, noise anddisplacement of the appliance during operation.Repeat the levelling action, if the appliance is notl
Push the drain hose onto the spigot and se-cure with a clip, ensure a loop is formed in thedrain hose to prevent waste from the sink en-tering the app
Electrical connection• The appliance must be earthed.• Make sure that the electrical information on therating plate agree with your domestic powersupp
Comments to this Manuals